这篇文章给大家分享的是有关cdh5 beta2集群配置文件的示例分析的内容。小编觉得挺实用的，因此分享给大家做个参考，一起跟随小编过来看看吧。
注意：需要自己配置java环境，ssh通信
版本：hadoop:hadoop-2.2.0-cdh6.0.0-beta-2.tar.gz
zookeeper:zookeeper-3.4.5-cdh6.0.0-beta-2.tar.gz
hbase:hbase-0.96.1.1-cdh6.0.0-beta-2.tar.gz
下载地址：http://archive.cloudera.com/cdh6/cdh/5/
Hadoop：
core-site.xml
===========================================
<configuration>
<property>
<name>fs.default.name</name>
<value>hdfs://master:8020</value>
<final>true</final>
</property>
<property>
<name>dfs.namenode.name.dir</name>
<value>/usr/local/hd/dfs/name</value>
</property>
<property>
<name>hadoop.tmp.dir</name>
<value>/usr/local/hd/tmp</value>
<description>A base for other temporary directories.</description>
</property>
<property>
<name>hadoop.proxyuser.hadoop.hosts</name>
<value>*</value>
</property>
<property>
<name>hadoop.proxyuser.hadoop.groups</name>
<value>*</value>
</property>
</configuration>
==================================================
hdfs-site.xml
==================================================
<configuration>
<property>
<name>dfs.datanode.data.dir</name>
<value>/usr/local/hd/dfs/data</value>
</property>
<property>
<name>dfs.replication</name>
<value>2</value>
</property>
<property>
<name>dfs.permissions</name>
<value>false</value>
</property>
<property>
<name>dfs.namenode.secondary.http-address</name>
<value>master:8021</value>
</property>
<property>
<name>dfs.webhdfs.enabled</name>
<value>true</value>
</property>
<property>
<name>dfs.web.ugi</name>
<value>hadoop,supergroup,zzg</value>
</property>
</configuration>
===============================================================
maped-site.xml
===============================================================
<configuration>
<property>
<name>mapreduce.framework.name</name>
<value>yarn</value>
</property>
<property>
<name>mapreduce.jobhistory.address</name>
<value>master:10020</value>
</property>
<property>
<name>mapreduce.jobhistory.webapp.address</name>
<value>master:19888</value>
</property>
</configuration>
=================================================================
yarn-site.xml
===============================================================
<configuration>
<!-- Site specific YARN configuration properties -->
<property>
<name>yarn.resourcemanager.address</name>
<value>master:8032</value>
</property>
<property>
<name>yarn.resourcemanager.scheduler.address</name>
<value>master:8030</value>
</property>
<property>
<name>yarn.resourcemanager.resource-tracker.address</name>
<value>master:8031</value>
</property>
<property>
<name>yarn.resourcemanager.admin.address</name>
<value>master:8033</value>
</property>
<property>
<name>yarn.resourcemanager.webapp.address</name>
<value>master:8088</value>
</property>
<property>
<name>yarn.nodemanager.aux-services</name>
<value>mapreduce_shuffle</value>
</property>
<property>
<name>yarn.nodemanager.aux-services.mapreduce.shuffle.class</name>
<value>org.apache.hadoop.mapred.ShuffleHandler</value>
</property>
</configuration>
============================================================
zookeeper
zoo.cfg
==========================================================
# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/usr/local/hd/zookeeper/data
# the port at which the clients will connect
clientPort=2181
server.1=master:2888:3888
server.2=slave1:2888:3888
server.3=slave2:2888:3888
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
==========================================================
hbase
hbase-site.xml
========================================================
<configuration>
<property>
<name>hbase.rootdir</name>
<value>hdfs://master:8020/hbase</value>
</property>
<property>
<name>hbase.cluster.distributed</name>
<value>true</value>
</property>
<property>
<name>hbase.zookeeper.quorum</name>
<value>master,slave1,slave2</value>
</property>
<property>
<name>hbase.zookeeper.property.clientPort</name>
<value>2181</value>
</property>
<property>
<name>hbase.zookeeper.property.dataDir</name>
<value>/usr/local/hd/zookeeper/data</value>
</property>
</configuration>
===========================================================
感谢各位的阅读！关于“cdh5 beta2集群配置文件的示例分析”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，让大家可以学到更多知识，如果觉得文章不错，可以把它分享出去让更多的人看到吧！