这篇文章将为大家详细讲解有关怎么搭建BeeGFS开发环境，小编觉得挺实用的，因此分享给大家做个参考，希望大家阅读完这篇文章后可以有所收获。
BeeGFS常用于高性能计算中的分布式文件存储，其对巨量小文件的支持相比于其他大多数文件系统而言，要好太多，这里介绍搭建的详细过程。一共使用3台服务器，一个磁盘分成两个区（分别用于元数据和数据存储），两个网卡（一个管理网，一个存储网）。
网络配置
网络分配
管理网络用于SSH登录等功能，都是千兆口，存储网络用于数据传输，为双万兆口Mode 6绑定。
| 主机名 | 管理网络 | 存储网络 | 服务部署说明 |
|---|
| sacd01 | 172.29.201.125 | 172.29.39.125 | mgmt，meta(2)，storage(401,402)，client |
| sacd02 | 172.29.201.126 | 172.29.39.126 | meta(3)，storage(501,502)，client |
| sacd03 | 172.29.201.133 | 172.29.39.113 | client |
下面的配置以sacd01为例进行说明。
sacd01 $ cat /etc/hosts
172.29.201.125 sacd01
172.29.201.126 sacd02
172.29.201.133 sacd03
sacd01 $ hostname
sacd01
sacd01 $ cat /etc/hostname
sacd01
网卡绑定
sacd01 $ eths=$(lspci | grep Ethernet); for bond in `ls -d /sys/class/net/bond[0-9]`; do nics=$(ls -d $bond/slave* | awk -F_ -v bond=$bond '$1~bond {print $2}' | tr -d ":"); for nic in $nics; do addr=$(ethtool -i $nic | awk '$1~"bus-info" {print $2}' | awk -F: '{printf $2":"$3}'); echo -e $(echo $bond | awk -F/ '{print $5}') "\t" $nic "\t" $addr "\t" $(echo -e "$eths" | grep $addr | awk -F: '{printf $3}'); done; done
bond0 enp26s0f2 1a:00.2 Intel Corporation Ethernet Connection X722 for 1GbE (rev 09)
bond1 enp95s0f0 5f:00.0 Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01)
bond1 enp95s0f1 5f:00.1 Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01)
sacd01 $ ip a | grep bond1
6: enp95s0f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1600 qdisc mq master bond1 state UP group default qlen 1000
7: enp95s0f1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1600 qdisc mq master bond1 state UP group default qlen 1000
8: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1600 qdisc noqueue state UP group default qlen 1000
9: bond1.1039@bond1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1600 qdisc noqueue state UP group default qlen 1000
inet 172.29.39.125/24 brd 172.29.39.255 scope global noprefixroute bond1.1039
sacd01 $ ifconfig bond1.1039
bond1.1039: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1600
inet 172.29.39.125 netmask 255.255.255.0 broadcast 172.29.39.255
inet6 fe80::6e92:bfff:fe67:9bdc prefixlen 64 scopeid 0x20<link>
ether 6c:92:bf:67:9b:dc txqueuelen 1000 (Ethernet)
RX packets 10 bytes 528 (528.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 16 bytes 992 (992.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
sacd01 $ cat /sys/class/net/bond1/bonding/mode
balance-alb 6sacd01 $ cat /etc/sysconfig/network-scripts/ifcfg-enp95s0f0
TYPE=Ethernet
NAME="enp95s0f0"
DEVICE=enp95s0f0
ONBOOT=yes
BOOTPROTO=none
MASTER=bond1
SLAVE=yes
sacd01 $ cat /etc/sysconfig/network-scripts/ifcfg-enp95s0f1
TYPE=Ethernet
NAME="enp95s0f1"
DEVICE=enp95s0f1
ONBOOT=yes
BOOTPROTO=none
MASTER=bond1
SLAVE=yes
sacd01 $ cat /etc/sysconfig/network-scripts/ifcfg-bond1
DEVICE=bond1
BOOTPROTO=none
ONBOOT=yes
TYPE=Bond
NM_CONTROLED=no
IPV6INIT=no
USERCTL=no
IPV6INIT=no
BONDING_MASTER=yes
BONDING_OPTS="miimon=100 mode=6"
#BONDING_OPTS="xmit_hash_policy=layer2+3 mode=4 miimon=100"
MTU=1600
sacd01 $ cat /etc/sysconfig/network-scripts/ifcfg-bond1.1039
DEVICE=bond1.1039
ONBOOT=yes
BOOTPROTO=static
IPADDR=172.29.39.125
NETMASK=255.255.255.0
VLAN=yes
存储配置
磁盘信息
sacd01 $ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 222.6G 0 disk
├─sda1 8:1 0 200M 0 part /boot
└─sda2 8:2 0 222.4G 0 part
├─centos-root 253:0 0 122.4G 0 lvm /
└─centos-home 253:1 0 100G 0 lvm /home
sdb 8:16 0 7.3T 0 disk
sacd01 $ lsblk -d | awk '$1!~"sda" && ($1~"^sd" || $1~"^nv") {print $1}' | xargs -I % sh -c 'echo -e "/dev/%\t"; smartctl -i /dev/% | grep -e "Product" -e "Device Model" -e "Model Number" -e "Rotation Rate" -e "Capacity" | awk -F\: "{print $2}"' | awk -F: 'NF==1{printf "\n"$1} NF==2{sub(/^[ ]+/,"",$2);printf $2"\t"} END {printf "\n"}'
/dev/sdb Logical Volume 8,000,999,784,448 bytes [8.00 TB]
sacd01 $ smartctl -i /dev/sdb
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-693.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: LSI
Product: Logical Volume
Revision: 3000
Compliance: SPC-4
User Capacity: 8,000,999,784,448 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Logical Unit id: 0x600508e000000000fadfaab948205506
Device type: disk
Local Time is: Wed May 8 09:56:05 2019 CST
SMART support is: Unavailable - device lacks SMART capability.磁盘分区
$ sgdisk /dev/sdb --zap-all --clear --mbrtogpt
$ sgdisk /dev/sdb -n 1:0:+2T -c 1:"beegfs meta" -t 1:8300 -n 2:0:+2T -c 2:"beegfs data" -t 2:8300
Setting name!
partNum is 0
REALLY setting name!
Setting name!
partNum is 1
REALLY setting name!
The operation has completed successfully.
$ sgdisk /dev/sdb -p
Disk /dev/sdb: 15626952704 sectors, 7.3 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): A3A34A32-C0FE-4133-BDDB-05A28E2F5455
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 15626952670
Partitions will be aligned on 2048-sector boundaries
Total free space is 7037018045 sectors (3.3 TiB)
Number Start (sector) End (sector) Size Code Name
1 2048 4294969343 2.0 TiB 8300 beegfs meta
2 4294969344 8589936639 2.0 TiB 8300 beegfs data
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 222.6G 0 disk
├─sda1 8:1 0 200M 0 part /boot
└─sda2 8:2 0 222.4G 0 part
├─centos-root 253:0 0 122.4G 0 lvm /
└─centos-home 253:1 0 100G 0 lvm /home
sdb 8:16 0 7.3T 0 disk
├─sdb1 8:17 0 2T 0 part
└─sdb2 8:18 0 2T 0 part
磁盘格式化
$ mkfs.ext4 -i 2048 -I 512 -J size=400 -Odir_index,filetype /dev/sdb1
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1073741824 inodes, 536870912 blocks
26843545 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1610612736
32768 block groups
16384 blocks per group, 16384 fragments per group
32768 inodes per group
Superblock backups stored on blocks:
16384, 49152, 81920, 114688, 147456, 409600, 442368, 802816, 1327104,
2048000, 3981312, 5619712, 10240000, 11943936, 35831808, 39337984,
51200000, 107495424, 256000000, 275365888, 322486272
Allocating group tables: done
Writing inode tables: done
Creating journal (102400 blocks): done
Writing superblocks and filesystem accounting information: done
$ mkfs.xfs /dev/sdb2
meta-data=/dev/sdb2 isize=512 agcount=4, agsize=134217728 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=536870912, imaxpct=5
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=262144, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
磁盘挂载
$ mkdir -pv /beegfs_meta /beegfs_data
$ mount /dev/sdb1 /beegfs_meta
$ mount /dev/sdb2 /beegfs_data
$ echo "/dev/sdb1 /beegfs_meta xfs defaults 0 0" | tee -a /etc/fstab
$ echo "/dev/sdb2 /beegfs_data xfs defaults 0 0" | tee -a /etc/fstab
$ df -h | grep beegfs
/dev/sdb1 2.0T 33M 2.0T 1% /beegfs_meta
/dev/sdb2 2.0T 33M 2.0T 1% /beegfs_data
$ mount | grep beegfs
/dev/sdb1 on /beegfs_meta type xfs (rw,relatime,attr2,inode64,noquota)
/dev/sdb2 on /beegfs_data type xfs (rw,relatime,attr2,inode64,noquota)
CPU配置
$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 72
On-line CPU(s) list: 0-71
Thread(s) per core: 2
Core(s) per socket: 18
Socket(s): 2
NUMA node(s): 2
Vendor ID: GenuineIntel
CPU family: 6
Model: 85
Model name: Intel(R) Xeon(R) Gold 6140 CPU @ 2.30GHz
Stepping: 4
CPU MHz: 1499.941
CPU max MHz: 3700.0000
CPU min MHz: 1000.0000
BogoMIPS: 4600.00
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 1024K
L3 cache: 25344K
NUMA node0 CPU(s): 0-17,36-53
NUMA node1 CPU(s): 18-35,54-71
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb cat_l3 cdp_l3 intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1 cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts hwp hwp_act_window hwp_epp hwp_pkg_req
内存配置
$ dmidecode -t memory | grep "Size: [0-9]* " -B7 -A12 | grep -e "^Handle" -e "Size:" -e "Type:" -e "Speed:" -e "Manufacturer:" -e "Part Number"
Handle 0x0038, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x003B, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x003E, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x0043, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x0046, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x0049, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x004E, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x0051, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x0054, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x0059, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x005C, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
Handle 0x005F, DMI type 17, 40 bytes
Size: 32 GB
Type: DDR4
Speed: 2666 MT/s
Manufacturer: Hynix
Part Number: HMA84GR7AFR4N-VK
$ dmidecode -t memory | grep "Size: [0-9]* " | wc -l
12
$ free -h
total used free shared buff/cache available
Mem: 376G 6.8G 368G 10M 983M 368G
Swap: 0B 0B 0B
关于“怎么搭建BeeGFS开发环境”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，使各位可以学到更多知识，如果觉得文章不错，请把它分享出去让更多的人看到。